• Welcome to visit our YinMei!
logo
  • Call Us
  • +86-757-26396878/+81-18138537011

Vacuum table manufacturers talk about Vacuum table installation methods



The vacuum table is one of the vacuum equipment actuators. The suction cup material is made of nitrile rubber and has a large breaking force. Therefore, it is widely used in various vacuum holding equipment, such as in the construction, paper industry, printing, glass and other industries. . Realize the task of holding and transporting thin and light objects such as glass and paper.

vacuum table are also called vacuum suction tools and vacuum nozzles. Generally speaking, using vacuum suction cups to grab products is the cheapest method. There are many types of vacuum suction cups. Rubber suction cups can be operated at high temperatures. Silicone rubber suction cups are very suitable for gripping products with rough surfaces. Suction cups made of polyurethane are very durable. In addition, in actual production, if the suction cup is required to have oil resistance, you can consider using materials such as polyurethane, nitrile rubber or vinyl-containing polymers to make the suction cup.



Installation method of vacuum table:

One: The connection between the vacuum table and the adapter is reinforced by the locking ring, making the connection safe and reliable. The connection mode of this structure is very convenient to replace the suction cup. Push the locking ring up to the top of the adapter, and pull down the old vacuum suction cup. Keep the position of the locking ring unchanged and put the new suction cup on the adapter. After confirming that the connection between the suction cup and the adapter is tight, return the locking ring to the original position, thus completing the replacement of the new and the old suction cup.

Two: The adapter of the vacuum table can also be connected with a buffer body, and the two nuts on the buffer body can be clamped and installed on the panel. The vacuum chuck uses different adapters, and multiple installation methods are available. Threaded connection (with internal thread and external thread), the buffer body structure is added to the right side, so it has buffer capacity, which can be panel mounted and connected with buffer body.

Get In Tohch